
Tools and Supplies to Make it:
- Sawgrass SG500 or SG1000 Printer
- Sawgrass VersiFlex Inks
- VersiFlex Light Paper
- Flat Heat Press
- Cotton T-shirt
How to Make It:
- For this project, we are using a cotton t-shirt we picked up at a local craft store
- In the Sawgrass Print Utility, we chose Natural Fabrics for the product.
- We printed this on 8.5×11 VersiFlex Light paper, but you can use larger paper for a larger design
How to Press It:
- Turn on your press on and set the temperature to 375F (191C) degrees
- If you see any dust, lint roll your print area to make sure your surface is clean.
- Place your shirt on the press and line the paper up on top as you place it on the product.
- Cover with blow out paper.
- Press the shirt for 45 seconds at VERY HIGH pressure.
- When finished, remove the shirt from the press and peel the paper off as quickly as possible.
Tips & Tricks:
- With cotton fabric, pressure and temperature are very important. Use a heat gun to check the temperature of your press. For a smooth result, have the pressure on your press as high as possible.
- We recommend a quick pre-press to get out any wrinkles. You can also do a quick finish press by removing the paper, covering your design with blowout or parchment paper, and then doing a quick second press at a lower pressure.